Onslow County, NC
Gutter Installation & Replacement in Jacksonville, NC
New gutters for new builds, additions and older homes whose gutters are sagging, leaking or too small for Onslow County rain. Request a free quote and a local gutter installer who serves your area will contact you.
Free quote · No obligation · Local Onslow County pros
Request a Gutter Installation Quote
Tell us about your home and a local installer will contact you.
Request a Gutter Installation Quote
Tell us about your home and a local installer will contact you.
When It's Time for New Gutters
Gutters rarely fail all at once. They wear out one joint, one hanger and one soaked board at a time. It's usually time to replace, not patch, when you see:
- Sagging or pulling away from the roof edge in more than one spot
- Leaking seams and corners that keep coming back after they've been sealed
- Rust, cracks or holes, especially on older steel gutters
- Peeling paint, stains or soft wood on the fascia boards behind the gutter
- Water spilling over the front edge in heavy rain even when the gutters are clean
- Puddles, erosion or mulch washouts along the foundation below the gutter line
- Gutters that were never sized for the roof, which is common on additions and porches that were tied into an existing system
If only one section is damaged, gutter repair may be all you need. The pro who looks at your home should tell you honestly which makes more sense.
What a Good Gutter Installation Includes
A new gutter system is more than metal on the fascia. Ask the installer how they'll handle each of these:
Right-sized gutters. Most homes use 5-inch K-style gutters. 6-inch gutters carry noticeably more water and are worth considering for large or steep roofs, long runs, and valleys where two roof planes dump into the same spot. Onslow County averages roughly 56 to 59 inches of rain a year (NOAA 1991–2020 normals), often in short, intense storms, so sizing matters here.
Correct pitch. Gutters need a slight, steady slope toward each downspout. Too flat and water sits; too steep and it looks crooked and can overshoot the outlet.
Enough downspouts, in the right places. Long runs usually need a downspout at each end. Larger 3x4-inch downspouts move more water than standard 2x3-inch ones and clog less often. See downspouts and drainage.
Solid hangers. Hidden hangers screwed into the fascia at close spacing hold up better to wind and heavy loads than old spike-and-ferrule systems.
Drip edge and flashing. A drip edge or gutter apron keeps water from running behind the gutter and into the fascia.
Fascia check. If the wood behind the old gutters is soft, it needs to be repaired before new gutters go up. Make sure the quote says how rotted wood will be handled and priced.
Gutter Materials
Aluminum
Most common choice. Lightweight, doesn't rust, many colors. Usually installed as seamless gutters.
$10–$20 per linear foot
Vinyl / PVC
Lowest upfront cost; can become brittle and sag over time.
$8–$12 per linear foot
Steel
Strong, but galvanized steel can rust, especially where the coating is scratched.
$10–$35 per linear foot (varies by gauge and finish)
Copper
Premium look that develops a patina and doesn't rust.
$25–$40+ per linear foot
National averages only, not local prices or a quote. For a full system HomeGuide puts the average at $2,200–$5,000 ($12–$25 per linear foot). Two-story homes, 6-inch gutters, extra downspouts and fascia repairs add to the price.
Gutters for Coastal Weather
Onslow County homes see hurricane season from June 1 through November 30, plus summer thunderstorms and nor'easters. When you're comparing quotes, ask about:
- Hanger type and spacing, since wind and water weight both pull on gutters
- Downspout size, because small downspouts are often the first thing to back up in a downpour
- Where the water goes once it leaves the downspout, especially on flat, sandy lots where water can pool against the foundation
- Adding gutter guards at the same time if the house sits under pines or oaks, since guards are easiest to fit on new gutters
How the Process Works
- 01
You send the form.
Tell us your town and whether this is a new build, an addition, or a replacement.
- 02
A local installer visits.
They measure the roofline, look at the fascia and roof edge, and check where water drains now.
- 03
You get a written quote.
It should list linear footage, size, material, downspouts, removal of the old system, and any wood repair.
- 04
Installation day.
On many single-family homes the work takes about a day. The contractor will give you a timeline for your house.
Gutter Installation FAQ
How long do new gutters last?
It depends on the material, how thick it is, and how well the gutters are maintained. Ask the installer about the expected life and warranty for the specific product they're quoting.
Should I replace gutters before or after a new roof?
If both are due, it usually makes sense to do the roof first or coordinate the two, since the drip edge and roof edge affect how the gutters are hung. Ask both contractors how they'll coordinate.
Do new gutters need a permit in Onslow County?
Rules depend on the jurisdiction and the scope of the project, so ask the installer whether any permit applies to your address. If you're in an HOA, check its rules on color and style first.
Can I get gutters on just part of the house?
Yes. Some homes only need gutters over entries, walkways or areas where runoff is causing problems, but a full system usually protects the foundation and siding better.